Hard drive failure data
The most reliable hard drive? There's no perfect one.
People read hard drive failure tables looking for the one model that will never fail. Here is what the numbers say instead, and the choices that actually protect your files, in the best possible way.
Backblaze releases hard drive failure statistics quarterly, and every time people read them the same way: as a ranking. Somewhere in the table, the thinking goes, is the drive that won't let you down. Find it, buy it, and your files are safe, or safer at least.
That perfect, or "safest" drive doesn't exist. Not because the data is bad (it's very good) but because of what failure rates are. A low failure rate means fewer drives fail. It doesn't mean yours won't.
This page puts the numbers side by side so you can see it for yourself, and then shows where the real difference is made.
1. What the best data says
The most detailed public record of hard drive failures comes from Backblaze, a cloud storage company that publishes failure figures for every drive model in its data centres. Its Q2 2026 report covers 354,415 drives.
Across the whole fleet, the lifetime annualized failure rate is 1.41%. In plain terms, basically it says: if you run 100 drives for a year, expect to replace one or two.
The best model in the lifetime table, a 24 TB Toshiba, sits at 0.5%. The worst, a 14 TB Seagate, sits at 5.88%. Most models sit far closer to the best than the worst: 20 of the 27 models in the table are below 2%, and only three are above 3%.
Two things are worth noticing:
- Even the best drive fails. 0.5% might not seem significant, but it isn't zero. Out of every 200 of those drives, about one fails each year.
- The expensive label doesn't buy much. This is one of the most significant findings. Backblaze's own FAQ says that "enterprise and consumer drives both deliver the same reliability in our environment." This statement was from 2015, but there are no signs that it has changed. They choose drives mainly by how much storage they get for the money.
If you want to read the tables yourself, confidence intervals and drive ages included, there's a guide to reading Backblaze's drive stats on the FileGriffon blog.
2. Stretch it over the years you'll actually keep it
Annual rates look small because they cover one year. You'll probably keep your files much longer than that. If a drive's failure rate stayed flat for ten years, the chance of it failing at some point would be:
| Failure rate per year | Chance of failing within 10 years |
|---|---|
| 0.5% (best in the table) | about 5%, or 1 in 20 |
| 1.41% (fleet average) | about 13%, or 1 in 8 |
| 5.88% (worst in the table) | about 44%, nearly 1 in 2 |
And it doesn't stay flat. Failure rates rise as drives age, so the real figures for an old drive are worse than this table. Buying the best drive moves you from roughly 1 in 8 to 1 in 20. That's a real improvement, but it still isn't "safe".
3. Now add a second copy
Here's the comparison this page is really about. Say your files are on one drive with an average failure rate, about 1.5% a year. You have two ways to spend money on protecting them:
- Option A: a better drive. Swap it for the best model in the table, 0.5% a year. Your chance of losing everything this year drops from 1.5% to 0.5%.
- Option B: a second drive. Keep the average drive and put a copy of your files on another average drive. To lose everything, both have to fail. If the two fail independently of each other, that's 1.5% × 1.5%, about 0.02% a year, or roughly 1 in 4,400.
Option A makes losing your files three times less likely. Option B makes it nearly 70 times less likely, and that's assuming you never replace the first drive after it fails. In practice you'd replace it within days, so the real risk is far lower still. A third copy takes it to about 1 in 300,000.
Try it with your own setup Hard drive failure calculator Your copies, where they are, how often you check them, and the odds over 1 to 10 years. It also tells you which single change would help most. Work out your odds →4. The catch: copies have to be independent
That multiplication only works if one drive failing tells you nothing about the other. Real life breaks that assumption in a few common ways:
- Same place. Two drives in the same house share the same fire, flood, break-in and power surge.
- Same batch. Drives bought together, from the same production run, and run equally hard can wear out around the same time.
- Same mistake. If you delete a folder, or ransomware encrypts it, a copy that updates automatically copies the damage too.
- Same damage. A file that is silently corrupted gets copied, corrupted, to every backup. The copy is perfect; the file inside it isn't.
None of these depend on which drive you bought. The best drive in the table burns just as well as the worst one.
This is why the usual advice is the 3-2-1 rule: three copies of your files, on two different kinds of storage, with one somewhere else. Each part of it breaks one of the links above. "Somewhere else" handles the house. Different storage handles the batch. Keeping at least one copy that doesn't update automatically (or that keeps old versions) handles the mistake.
5. A backup you haven't restored is a guess
Having copies isn't the same as being able to get your files back. Copies go stale when a backup job quietly stops running. Drives sitting in a drawer can fail without anyone noticing. Passwords for encrypted backups get lost.
So once in a while, pick a few files and restore them from each copy. Open them. If that works, you have a backup. If it doesn't, you've found out on a quiet afternoon instead of on the day you needed it.
6. Checking that the copies are still right
The last link, "same damage", needs its own step, because no failure table can see it. A drive can keep running perfectly while a file on it has changed. The drive hasn't failed, so it doesn't show up in any failure statistics, and the damaged file gets copied into your backups like any other.
The defence is to keep a record of what each file should be (a checksum) and check against it now and then, so you notice damage while a good copy still exists somewhere. Some files can also carry recovery data that lets damage be repaired without going to a backup at all. Our parity bench shows how that works, one strip at a time.
7. So which drive should you buy?
The answer turns out to be pleasantly boring:
- Skip models with a bad record. One bad quarter can be bad luck; a model that stays high across several reports, with plenty of drives behind the number, is a real warning.
- Check you can actually buy it. Many drives in data-centre statistics are server parts that rarely show up in normal shops.
- Then buy on price per terabyte. Whatever you save goes toward the second copy, which does far more for your files than a better first drive.
- Assume it will fail. Then plan for that day: more than one copy, one of them somewhere else, restored now and then, and checked.
The perfect drive doesn't exist. A setup where any one drive can fail without costing you anything does, and it's mostly made of ordinary drives. The failure calculator shows how close yours is.
Sources
- Backblaze Drive Stats for Q2 2026, Backblaze, 2026. Fleet size, lifetime failure rates and the 27-model lifetime table. Checked 10 November 2026.
- The Official Hard Drive Stats FAQ, Backblaze. Enterprise and consumer drives, and how Backblaze chooses drives.
- Are Hard Drives Getting Better? Let's Revisit the Bathtub Curve, Backblaze. How failure rates change as drives age.
The calculations on this page assume a constant yearly failure rate and copies that fail independently. Real drives get less reliable with age, and copies in the same place are not independent, which is the point of section 4.